INERGEK
INDUSTRIAL ENGINEERING & CONNECTIVITY
部品番号
SBRS- CAPS
デュアルウォール製品

4:1 shrink ratio Adhesive Lined Heat Shrink End Caps

SBRS- CAPS

Adhesive-Lined Insulating Caps

Adhesive lined, heat shrink insulating caps specifically designed to insulate, seal and protect end or stub splices in wiring harness and electronic assemblies.

Adhesive lined, heat shrink insulating caps specifically designed to insulate, seal and protect end or stub splices in wiring harness and electronic assemblies.

23   SBRS-(4X)GR1000.png


Features

● 4:1 shrink ratio allows fewer sizes to cover a wide range of profiles

● Seals and protects against water, moisture and chemical

● Adhesive bonds readily to PVC, XLPE and PP-EPDM cable jackets

● Shrinks rapidly for quick installation

● Continuous operating temperature:-45℃-125℃

● Minimum shrink temperature: 125℃


Technical Data

PropertyTest MethodStandard
Tensile Strength(MPa)ASTM D2671≥10.4
Elongation(%)ASTM D2671≥200
Tensile Strength after aging (MPa)Ul224 158℃X168hr​≥7.3
Elongation after aging(%)Ul224 158℃X168hr≥100
Dieletric strength(kV/mm)IEC 60243≥15
Volume resistivity(Ω.cm)IEC 60093≥1X1014

​

Specification Table

Dimensions

Code

Size

(mm)​

Standard

 Length(mm)

Expanded​Recoverd

Inner

Diameter      Min(mm)

Inner 

Diameter

Max(mm)

Adhesive

Thickness

(mm)

Total Wall 

Thickness(mm)

SBRS-CAPS-1

5.75

4.00

5.75

1.27

0.56

1.70

SBRS-CAPS-2

7.40

5.80

7.44

1.65

0.76

2.00

SBRS-CAPS-310.807.4010.852.411.372.30


注意: INERGEK は、適切と思われる変更を加える権利を留保します。
🌐 www.inergek.com    ✉ [email protected]    ☎ +86 189 7105 6957
INERGEK
INDUSTRIAL ENGINEERING & CONNECTIVITY
部品番号
SBRS- CAPS
注意: INERGEK は、適切と思われる変更を加える権利を留保します。
🌐 www.inergek.com    ✉ [email protected]    ☎ +86 189 7105 6957